VFD Stubby Conversion Kit for VRD: Fitment and Build FAQ
Answers to the fitment questions that decide whether the VFD Stubby Conversion Kit works on your VRD build, from motor length to VS4-10 compatibility.
Motor and transmission fitment
What motor length does the VFD Stubby Conversion Kit require?
The kit requires a motor 35mm in length or less, typically an outrunner. A standard 540-length motor is not compatible, so check your motor's length before ordering. The shorter topshaft and machined aluminum posts are what free up the space for this.
Does the kit work with a standard 540 motor?
No. The catalog states it is not compatible with standard 540 length motors. If your build uses a 540 can, this conversion is not the right path.
What does the kit change in the VFD transmission?
It shortens the VFD transmission using a new topshaft and machined aluminum posts. It also includes updated chassis bracing, a behind-the-axle servo relocation mount, and a shortened VRD skid plate extension for the F10 axle.
Key specs that decide fitment
VFD Stubby Conversion Kit for VRD: Maximum motor length: 35mm This is the hard limit for motor choice; anything longer will not fit the shortened transmission.
VFD Stubby Conversion Kit for VRD
VFD Stubby Conversion Kit for VRD: 50mm drag link The included drag link length is part of the steering package with the behind-the-axle servo mount.
VFD Stubby Conversion Kit for VRD: Use of 24mm length servo horn is recommend The recommended servo horn length helps you plan the steering linkage before installation.
Chassis, servo and VS4-10 compatibility
Is the VFD Stubby Conversion Kit compatible with the VRD CMS Conversion?
No. The catalog states it is not compatible with the VRD CMS Conversion. If you are running or planning that conversion, this kit will not work with it.
Will the kit fit a VS4-10?
Not all components are compatible with the VS4-10. The topshaft and shortened posts can be used, but the motorplate mounts will not line up. Chassis and skid plate parts are also not compatible. Axle Mounted Steering is not compatible with the VS4-10 chassis.
Which VRD kit is this designed for?
The kit works with the VPS09015 VRD Carbon Kit. The combination of a lightweight outrunner motor and the lowered servo position is intended to significantly lower the center of gravity and increase performance on that platform.
What servo mount comes with the kit?
It includes a molded servo behind-axle F10 mount. This relocation is part of how the kit lowers the servo position, and it pairs with the included 50mm drag link and the recommended 24mm servo horn.
What's in the box and what to check before you buy
What parts are included in the kit?
The package includes a molded servo behind-axle F10 mount, a molded shortened skid plate, molded chassis bracing, a shortened VFD machined topshaft, shortened VFD machined aluminum motor plate posts, M4 rod ends and pivot balls, required hardware, and an instruction sheet.
Do I need to source extra hardware?
The kit lists required hardware as included, along with M4 rod ends and pivot balls. Check the instruction sheet for any additional requirements specific to your build.
What should I verify before ordering?
Confirm three things: your motor is 35mm or shorter (typically an outrunner), you are not running the VRD CMS Conversion, and your chassis is a VRD rather than a VS4-10 if you need the full kit. If you are mixing parts onto a VS4-10, only the topshaft and shortened posts are noted as usable, and the motorplate mounts will not line up.