Voltar ao blog
Comparações 2026-11-15 Vanquish Products - Premium RC Crawler Kits & Accessories 2 visualizações

H10 Aluminum Front Axle Housing vs Stock: What Actually Changes

H10 Aluminum Front Axle Housing vs Stock: What Actually Changes

Compare the Vanquish Currie H10 aluminum front axle housing with the stock molded H10 housing: fitment, reuse of parts, bump stops, and what stays unconfirmed.

The short answer: same footprint, different material

The Vanquish Products Currie H10 Aluminum Front Axle Housing is a direct replacement for the H10 front axle housing used in the H10 Optic and the VPS08800 F10 front axle set. It is built to the same outside dimensions as the molded H10 housing, so it keeps the original clearance and reuses your existing H10 internals. The main change is the material: machined aluminum instead of molded plastic.

That means this is not a wider axle, a different suspension layout, or a new steering geometry. It is a housing swap that preserves the H10's 4-link suspension design and behind-the-axle servo mount while adding a machined aluminum structure with built-in steering bump stops.

What the aluminum housing is—and what it replaces

  • H10 Aluminum Front Axle Housing: Direct replacement for the H10 front axle housing included in the H10 Optic (VPS09010, VPS09027) and VPS08800 F10 front axle set. This tells you the swap is intended for those specific H10-based axles, not a universal fit for any crawler axle.
    H10 Aluminum Front Axle Housing
    H10 Aluminum Front Axle Housing
  • H10 Aluminum Front Axle Housing: Built to the same outside dimensions as the molded H10 axle housing to maximize clearance and reuse original components. You keep the same packaging envelope and do not need to change link positions or shock mounts for clearance reasons.
  • H10 Aluminum Front Axle Housing: Machined in the USA from domestic aluminum on Matsuura true 5-axis CNC machines. This is the manufacturing context for the material upgrade; it explains the intended quality but is not a performance guarantee.

Aluminum vs. stock molded housing: what changes on the bench

The table below separates confirmed differences from items the supplied information does not address. Treat the 'not confirmed' column as a signal to check your own build rather than an assumption that the feature is missing.

  • Material and construction: Stock: molded plastic H10 housing. Aluminum: machined domestic aluminum, 5-axis CNC. This is the core difference.
  • Outside dimensions: Both are stated to share the same outside dimensions, so clearance and component packaging stay the same.
  • Steering bump stops: The aluminum housing has built-in steering bump stops at 47 degrees. The supplied information does not state the stock housing's bump stop specification.
  • Reused parts: All bearings, hardware, 3rd member, bearing retainers, gears, knuckles, and axle shafts are reused from your H10 axle. The aluminum housing replaces only the plastic housing.
  • Weight: The supplied information does not provide a weight for either housing, so no accurate aluminum-vs-plastic weight comparison can be made here. Weigh your own parts if weight is a deciding factor.
  • Suspension and servo layout: Both are described around the H10's 4-link suspension and behind-the-axle servo mount. The aluminum housing does not change that layout.
  • Finish options: The aluminum housing is available in Black and Clear. The stock housing's finish is not part of this comparison.

Fitment: what you need before you order

The aluminum housing is intended for H10 front axles from the H10 Optic RTR (VPS09010), H10 Optic KIT (VPS09027), and VPS08800 F10 front axle set. It replaces the plastic housing from those assemblies. If your axle is not one of those, the supplied information does not confirm compatibility.

One specific note: the housing is for use with the IRC00509 S8E lower shock mount offset pivot ball at the shock mount locations. That is a required companion part, not an optional tuning item, according to the product information.

Because the housing reuses your existing internals, the swap assumes your current bearings, gears, knuckles, and shafts are in serviceable condition. The supplied information does not include a rebuild interval or wear limits, so inspect your parts before transferring them.

What comes in the box

  • H10 Aluminum Front Axle Housing: Package includes one H10 front axle housing and two M2.5x6mm bump stop screws. The bump stop screws are included, but the housing does not include bearings, gears, knuckles, or axle shafts—those come from your existing axle.
  • H10 Aluminum Front Axle Housing: Replaces the plastic axle housing from VPS09010, VPS09027, and VPS08800; all bearings, hardware, 3rd member, bearing retainers, gears, knuckles, and axle shafts are reused. This confirms the scope of the swap: you are changing the housing only, not the entire axle assembly.

Installation: where the instructions come from

The product information refers you to the VPS09010, VPS09027, or VPS08800 instruction manuals for replacement assembly instructions. In other words, Vanquish does not supply a separate step-by-step for this housing; you follow the same assembly sequence used for the original axle, substituting the aluminum housing.

The supplied information does not include torque values, threadlocker recommendations, or a break-in procedure for the aluminum housing. If you need those details, they are not confirmed here—check the referenced manuals or ask Vanquish directly rather than guessing.

The honest trade-offs

The aluminum housing gives you a machined metal structure with built-in 47-degree bump stops and the same fit as the stock housing. It also keeps your existing internal parts, which can make the swap more economical than replacing a complete axle.

The trade-offs are less about performance claims and more about unknowns. The supplied information does not state a weight difference, so you cannot assume the aluminum housing is lighter or heavier without measuring. It also does not state a strength rating or a service life. And because it reuses your internals, any wear in those parts carries over.

If your goal is a direct-fit aluminum housing for an H10 front axle with no geometry changes, this is the part the catalog describes. If you are looking for a dimensional change, a different suspension layout, or a confirmed weight saving, the supplied evidence does not support those expectations.

Artigos relacionados

Customer Service
Início
Produtos
Carrinho
Perfil