Torna al blog
Guide pratiche 2026-11-17 Vanquish Products - Premium RC Crawler Kits & Accessories 1 visualizzazioni

VFD Slipper Eliminator Top Shaft Set: Install and Setup Guide

VFD Slipper Eliminator Top Shaft Set: Install and Setup Guide

Learn how to install the VFD Slipper Eliminator Top Shaft Set, what it replaces, and the critical gear compatibility rule that protects your VFD Twin transmission.

What the VFD Slipper Eliminator Top Shaft Set Does

The VFD Slipper Eliminator Top Shaft Set replaces the slipper clutch assembly in your VFD Twin transmission with a solid top shaft. This Vanquish VFD slipper delete removes the slipper as a tuning variable, giving you direct, consistent power delivery to the wheels. The set is also a direct replacement for the VFD transmission top shaft.

Before you install it, understand the one compatibility rule that matters most: the set is not recommended for use with VFD Twin powder metal gears. If you plan to eliminate the slipper, Vanquish recommends the optional machined steel gear set for the VFD Twin. Using the eliminator with powder metal gears may lead to premature wear or failure, so check your current gear material first.

What’s in the box

  • VFD Slipper Eliminator Top Shaft Set: Package includes: X1 Topshaft, X1 Spur gear plate, X1 M4 Nut, X1 Topshaft Spacer, X1 2x10mm Pin, and X3 M3x6mm Buttonhead screws. Knowing the exact contents helps you confirm you have all parts before disassembly and prevents mid-install surprises.
    VFD Slipper Eliminator Top Shaft Set
    VFD Slipper Eliminator Top Shaft Set
  • VFD Slipper Eliminator Top Shaft Set: Not recommended for use with VFD Twin powder metal gears. Use optional machined steel gear set for VFD Twin when eliminating the slipper system. This is the critical compatibility check: using the wrong gear material can damage your transmission.

How to install the VFD Slipper Eliminator Top Shaft Set

These steps assume you have the VFD Twin transmission and the correct gear set. Work on a clean bench and keep small parts organized.

  1. Verify gear compatibility: Confirm your VFD Twin is equipped with machined steel gears, not powder metal gears. If you have powder metal gears, install the optional machined steel gear set before proceeding.
  2. Remove the existing slipper assembly: Disassemble the slipper clutch from the top shaft according to your kit’s instructions. Keep the original parts in case you need to revert.
  3. Install the new top shaft: Fit the supplied top shaft into the transmission, ensuring it seats properly. Use the included 2x10mm pin where required by the original layout.
  4. Attach the spur gear plate: Mount the spur gear plate onto the top shaft. Secure it with the three M3x6mm buttonhead screws. Tighten evenly in a cross pattern to avoid binding.
  5. Install the M4 nut and spacer: Thread the M4 nut onto the shaft and place the top shaft spacer as needed to set gear mesh. Check that the spur gear aligns correctly with the rest of the drivetrain.
  6. Check for free rotation: Rotate the top shaft by hand to ensure it spins freely without binding. Recheck screw tightness and gear mesh before powering up.

Slipper eliminator torque: what to expect

With the slipper removed, torque delivery becomes direct and predictable. You no longer have a slip point to absorb shock loads, so the drivetrain feels more connected. This can improve climbing consistency, but it also means you should be mindful of sudden throttle inputs that could stress components. The supplied information does not specify a torque setting for the M4 nut or the M3 screws; use your best judgment and follow general RC best practices for tightness—snug, not over-tightened.

VFD top shaft replacement: when to consider it

If you are already replacing a worn top shaft or converting from a slipper setup, this set is a direct replacement for the VFD transmission. It is designed for use with the VFD Twin transmission. If you are unsure whether your transmission is a VFD Twin or an earlier VFD, check your kit documentation before ordering.

What the supplied information does not cover

The catalog does not include step-by-step installation instructions or torque specifications. It also does not state whether the set works with aftermarket spur gears or other transmission variants. For those details, consult your kit manual or Vanquish support. Always prioritize the gear compatibility warning: powder metal gears are not recommended with this eliminator.

Articoli correlati

Customer Service
Home
Prodotti
Carrello
Profilo