SCX10-II Motor Plate Clear Anodized Install & Care

Quick answer

Install the Vanquish SCX10-II Motor Plate Clear Anodized using the included M2.5 screws on the 2-speed capable transmission version of the kit. Care for the anodized finish by avoiding harsh solvents and handling with clean hands.

Installation and care steps

1. 1. Confirm your transmission version: Check that your SCX10-II has the 2-speed capable kit transmission, not the RTR or Builders Kit version. This plate will not fit those. Mistake: Trying to force the plate on the wrong transmission can strip the screw holes or bend the plate.
2. 2. Prepare the mounting area: Clean the transmission face with isopropyl alcohol to remove grease. Let it dry completely before installation. Checkpoint: A clean surface prevents the plate from sitting unevenly, which can cause motor alignment issues.
3. 3. Align the motor plate: Place the plate over the transmission output shaft area. The holes should line up with the tapped holes on the transmission housing. Do not force it. Mistake: Forcing the plate can damage the anodized coating. If holes don't align, recheck the transmission version.
4. 4. Secure with the M2.5 screw: Thread the included M2.5 screw by hand first to avoid cross-threading. Tighten gently with a hex driver until snug—do not overtighten. Mistake: Overtightening can strip the soft aluminum threads or crack the anodized surface.
5. 5. Care for the finish: After installation, avoid using harsh solvents like acetone or brake cleaner on the plate. Clean with mild soap and water, and dry with a soft cloth. Checkpoint: Harsh chemicals can dull or remove the anodized layer over time.

Product facts

• SCX10-II Motor Plate Clear Anodized: Motor Plate is for use with the Axial SCX10-II Kit (2 speed capable) version of the transmission only. Package contains: 1 - Motor plate, 1 - M2.5 Screw. Using the correct transmission version ensures a proper fit and prevents damage to the plate or transmission housing.