Painted Blue Bed Sides for RC Crawlers: Fitment and Care
By Vanquish Products - Premium RC Crawler Kits & Accessories | Published: 2026-10-20
Category: Tips & Care
Learn how to fit and care for painted blue bed sides on your RC crawler. Get practical tips for installation, cleaning, and maintenance to keep them looking sharp.
Quick Answer
Painted blue bed sides from Vanquish Products are a direct-fit replacement for the VS4-10 Fordyce RTR, requiring no trimming. Care for them like any painted Lexan body part: wash gently with mild soap, avoid harsh chemicals, and store away from direct sunlight.
Why Fitment Matters for Bed Sides
When you buy replacement body parts, fitment is the first thing that can go wrong. The painted blue bed sides are designed specifically for the VS4-10 Fordyce RTR, so they match the factory mounting points and contours. That means you can swap them without cutting or drilling, which is a big time-saver if you're repairing a damaged bed or changing the look of your rig.
If you're using a different VS4-10 variant or a custom body, the bed sides may not line up perfectly. Always test-fit before painting or securing them, and check that the mounting holes align with your chassis. A little patience here prevents frustration later.
Caring for Painted Lexan
The bed sides are painted Lexan, the same material used for many RC bodies. Lexan is tough but can scratch or fade if you treat it roughly. The factory paint is applied to the inside of the Lexan, which protects it from scratches during normal use, but the outer surface can still show wear.
To keep the blue paint looking fresh, avoid using abrasive cleaners or paper towels. Use a soft microfiber cloth and a mild automotive soap diluted in water. Harsh solvents like acetone or brake cleaner will attack the paint and the Lexan itself, so keep those away from your RC body parts.
Frequently Asked Questions
- Are the bed sides a direct fit?
- Yes, they are designed for the VS4-10 Fordyce RTR and come 100% cut, so no trimming is needed. They are a replacement part for VPS09012. Check that your truck is a VS4-10 Fordyce RTR before ordering.
- How do I clean painted bed sides?
- Use a soft microfiber cloth with mild soap and water. Avoid harsh chemicals and abrasive pads that can scratch or dull the paint. Always dry with a clean, soft cloth to prevent water spots.
- Can I paint over them if I want a different color?
- Technically yes, but it's not recommended. The factory paint is applied inside the Lexan, so painting over the outside may not adhere well and can flake off. If you want a different color, consider buying unpainted bed sides instead. For a custom color, start with an unpainted set to get the best finish.
Product Facts
- Bed Sides - Painted Blue: These bed sides are painted to match the factory RTR color and are 100% cut with no trimming required. You can install them straight out of the box, saving time and avoiding the risk of cutting mistakes.
Bed Sides - Painted Blue
