What the Origin Pro Tube Bumpers Cover
The Vanquish Origin Pro Tube Bumpers are molded front and rear bumpers designed for the VS4-10 Pro and VS4-10 Chassis Kits. They also fit other vehicles that use a standard 43mm post style mounting system. If you are building or upgrading a compatible RC crawler, these bumpers add a classic tube look without the weight of metal.
What's in the Box
- Origin Pro Tube Bumpers: Package includes: 1pc Molded Front Bumper, 1pc Molded Rear Bumper, 2pc Molded shackle, 1pc Molded receiver shackle mount, 1pc molded trailer hitch. You get everything needed for a full front and rear bumper setup, plus scale accessories like shackles and a trailer hitch, all in one package.

Origin Pro Tube Bumpers
Fitment Notes and Compatibility
These bumpers are compatible with the cross braces used in the VS4-10 Pro and VS4-10 Chassis Kits. They are not compatible with the VS4-10 Limited unless you also use molded chassis braces. The mounting system uses standard 43mm post spacing, so they can fit many other RC crawler frames that share that pattern.
Before you start, confirm that your vehicle has the correct post spacing and that the cross braces (if any) match. The bumpers are molded plastic, so they are lighter than metal tube bumpers but also less impact-resistant.
Hardware You Will Need
Mounting hardware is not included. You will need to supply your own screws, nuts, and washers to attach the bumpers to your vehicle's mounting posts. The bumpers use standard 43mm post style mounting, so any hardware that fits that pattern should work. Check your chassis manual for the correct thread size and length.
Setup Steps
- 1. Prepare the mounting posts: Ensure your vehicle has 43mm post style mounting points. If you are using the VS4-10 Pro or Chassis Kit, the cross braces are already compatible.
- 2. Attach the front bumper: Position the molded front bumper on the mounting posts. Use your own hardware (not included) to secure it. Tighten evenly to avoid warping the plastic.
- 3. Attach the rear bumper: Repeat the process for the rear bumper. The package includes one front and one rear bumper, so they are not interchangeable.
- 4. Install scale accessories: The molded shackles, receiver shackle mount, and trailer hitch can be added after the bumpers are mounted. They clip or screw onto the bumpers for a finished scale look.
What the Supplied Information Does Not Cover
The catalog does not specify the exact hardware thread size, length, or head style required. It also does not include performance claims such as weight savings, impact strength, or trail durability. For fitment on vehicles other than the VS4-10 Pro and Chassis Kit, measure your post spacing and cross brace clearance before ordering.


