How to Install the Yeti Steering Rack Black Anodized
By Vanquish Products - Premium RC Crawler Kits & Accessories | Published: 2026-10-29
Category: How-to Guides
Step-by-step guide to replacing the stock plastic Yeti steering rack with the Vanquish Products black anodized aluminum version. Improve steering response and eliminate slop.
Quick Answer
Replace the stock plastic Yeti steering rack with the Vanquish Products black anodized aluminum version to eliminate steering slop and improve response. The install takes about 20 minutes and requires basic tools.
Why Upgrade to the Aluminum Yeti Steering Rack
The stock plastic steering rack on the Axial Yeti can develop play over time, leading to vague steering and reduced control. The Vanquish Products aluminum rack replaces that plastic piece with a stronger material, removing the wiggle and providing more direct steering response. The black anodized finish also adds a clean, durable look to your chassis.
What You'll Need
You'll need a 2.0mm hex driver, a 1.5mm hex driver, needle-nose pliers, and thread-locking compound (blue). The install is straightforward, but working on a clean, well-lit surface helps avoid losing small screws.
Installation Steps
- Remove the Old Steering Rack: Remove the two screws securing the stock plastic rack to the steering linkage using a 2.0mm hex driver. Slide the rack out of the steering arm. Common mistake: forgetting to note the orientation of the rack—the holes are offset, so take a photo before removal.
- Prepare the New Aluminum Rack: Apply a small drop of blue thread-locking compound to the threads of the included mounting screws. This prevents them from vibrating loose during runs. Common mistake: using too much thread locker, which can seep into the steering linkage and cause binding.
- Install the New Rack: Slide the Vanquish Products aluminum rack into the steering arm in the same orientation as the old one. Secure it with the two screws, tightening evenly. Common mistake: overtightening the screws, which can strip the aluminum threads or bind the steering. Double-check that the steering linkage moves freely before re-installing the servo horn.
Product Details
- Yeti Steering Rack Black Anodized: Replaces the stock plastic Yeti Steering Rack AX31122-5 with a stronger aluminum rack. The aluminum construction removes the wiggle common with the plastic part, giving you more precise steering control on the trail.
Yeti Steering Rack Black Anodized
